Hochiki

Hochiki Marine Approved Dual Sounder Controller with SCI

Model CHQ-DSC2/M(SCI) is a Marine Approved Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. The unit utilises simple DIL switches for reliable addressing.

A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQDSC2/M(SCI), increases the IP rating to IP65.

Hochiki Marine Approved Multi-Sensor Photoelectric/Heat – Ivory case

Model ACC-ENM is a Multi-Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol, and incorporates a thermal element and High Performance photoelectric smoke chamber.

The ACC-ENM has three modes, which are controlled from the Control Panel, allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel (pulsing/non-pulsing). The ACC-ENM smoke chamber can easily be removed or replaced for easy maintenance.

Hochiki Marine Approved Single Zone Monitor with SCI

Model CHQ-SZM2/M(SCI) is a Marine Approved Single Zone Monitor designed to allow up to 6 marine approved conventional detectors to be interfaced to Hochiki’s ESP analogue addressable system. The unit also features an integral short-circuit isolator. The CHQSZM2/M(SCI) utilises simple DIL switches for reliable addressing. A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQ-SZM2/M(SCI), increases the IP rating to IP65. The conventional zone on the CHQ-SZM2/M(SCI) does not support any line continuity options; if Call Points are being interfaced they should be wired at the beginning of the zone.

Hochiki Marine Approved Weatherproof Addressable Manual Call Point with SCI (Red)

Model HCP-WM(SCI) is a weatherproof Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol.

The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing*1 for communications polling and is continuously lit when the unit is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit.

Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.

Hochiki Module Back Box

The CHQ-BACKBOX is designed for installations where the CHQ “Smart-Fix” Modules (CHQ-DIM, CHQ-SZM, CHQ-DZM, CHQ-DSC, CHQ-MRC, CHQ-DRC, plus SCI versions) require mounting within a glanded enclosure. The unit features ten knock-outs suitable for cable glands and accepts the CHQ Modules directly as a lid.

Hochiki Single Input Module

The CHQ-SIM has been designed to allow a single monitored input to be connected to the ESP loop. This provides a compact, low-cost option where the installation of the larger CHQ Range of Modules might be difficult.

The CHQ-SIM features flying leads as well as a wiring terminal block for loop connection, making installation quick and easy. The unit is addressed with the TCH-B100 Hand Held Programmer utilising the on-board programming connector and a PL-3 lead.

Key Features:

Includes a single monitored input
Small design for simple provision of a monitored input onto an ESP loop
Flying leads for easy installation
Addressed with TCH-B100 Hand Held Programmer
Approved by LPCB & VdS

Hochiki Single Output Module

Single Output Module

Hochiki Surface Mounting Call Point Back Box (Red)

A surface mounted back box for the HCP-E(SCI) manual call point which is 32 mm deep.

Key Features

Durable
For use with HCP-E call point range
Allows addressable call point to be surface mounted

Ordering codes: SR BACKBOX
For use with: HCP-E range
Dimensions: 86 mm (W) x 86 mm (H) x 32mm
Colour / Case Material: Red / ABS

Hochiki Surface Mounting Call Point Box (Yellow)

A surface mounted back box for the HCP-Y(SCI) yellow manual call point which is 32mm deep.

Key Features

For surface mounting of the HCP call points
Yellow colour
32 mm deep
86 mm square

Hochiki Wall Beacon – Ivory case, white LEDs

An addressable loop-powered wall beacon, with a high intensity LED and a custom designed free-form optic which produces a highly visible flash. Coverage includes 5, 5.5 and 7 sqm*2. The unit is designed to fit the YBN-R/3, YBN-R/3(SCI) or the YBO-BS base sounder and is available with an ivory, white or red casing with red or white LEDs.

Hochiki Wall Beacon – Red case, red LEDs

Hochiki Wall Beacon – White case, red LEDs

Hochiki Wall Sounder Beacon – Red case, red LEDs

Model CHQ-WSB2 is an addressable loop powered Wall Sounder Beacon innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with
low current consumption. The unit features an integral beacon within the horn utilising high intensity LED technology and is designed to fit to the Standard Base (CHQ-WPK) & YBOR/SCI(WHT))
or the Isolator Base (YBO-R/SCI(RED) & YBO-R/SCI(WHT)). The sounder is IP rated to IP21 for internal use but it can be made weatherproof by utilising the WS2-WPK Weatherproof Kit, which consists of a specialised back box and gasket set.

Also incorporates an auto shutdown mode*1 which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.

Hochiki Wall Sounder Beacon – Red case, white LEDs

Also incorporates an auto shutdown mode*1 which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.

Hochiki Wall Sounder Beacon – White case, red LEDs

Also incorporates an auto shutdown mode*1 which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.

Hochiki Wall Sounder Beacon – White case, white LEDs

Model CHQ-WSB2 is an addressable loop powered Wall Sounder Beacon innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption. The unit features an integral beacon within the horn utilising high intensity LED technology and is designed to fit to the Standard Base (CHQ-WPK) & YBOR/SCI(WHT))
or the Isolator Base (YBO-R/SCI(RED) & YBO-R/SCI(WHT)). The sounder is IP rated to IP21 for internal use but it can be made weatherproof by utilising the WS2-WPK Weatherproof Kit, which consists of a specialised back box and gasket set.

Also incorporates an auto shutdown mode*1 which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.

+44 (0) 203 141 0999

+44 (0) 203 141 0999

Hochiki Marine Approved Dual Sounder Controller with SCI

Hochiki Marine Approved Multi-Sensor Photoelectric/Heat – Ivory case

Hochiki Marine Approved Single Zone Monitor with SCI

Hochiki Marine Approved Weatherproof Addressable Manual Call Point with SCI (Red)

Hochiki Module Back Box

Hochiki Single Input Module

Hochiki Single Output Module

Hochiki Surface Mounting Call Point Back Box (Red)

Hochiki Surface Mounting Call Point Box (Yellow)

Hochiki Wall Beacon – Ivory case, white LEDs

Hochiki Wall Beacon – Red case, red LEDs

Hochiki Wall Beacon – White case, red LEDs

Hochiki Wall Sounder Beacon – Red case, red LEDs

Hochiki Wall Sounder Beacon – Red case, white LEDs

Hochiki Wall Sounder Beacon – White case, red LEDs

Hochiki Wall Sounder Beacon – White case, white LEDs

+44 (0) 203 141 0999